Pros: Hand saddle reduces strain and provides good leverage. Cons: May take some getting used to for standard pencil grip users. Our Rating: 5. Our top pick for pencil grip cutter, and top pick overall is the Custom Grip Supercutter.
The cutter features a spring controlled oil flow system, which works well and keeps the cutting wheel well lubricated. Pros: Comfortable grip provides good leverage. Cons: Oil system can become leaky or dried out. Our Rating: 4. Our top pick for pistol grip cutters is the Toyo Pistol Grip.
It has all the main features you should look for in a pistol grip cutter, and is higher quality than the cheaper ones you might find in hardware stores, etc. If you have issues with grip strength or other wrist related problems, this cutter might be your best bet.
A small percentage of users have reported issues with the oil delivery system either leaky or dried up , but those appear to be edge cases and can be solved by dipping the wheel periodically. Pros: Cuts both long strips and perfect circles.
Cons: Somewhat complicated - be sure to read instructions. This type of cutter is more specialized than the others on this list, but we felt it was important to include here.
Sweep or vacuum the work surface to remove any dust, dirt or debris. Lay down a thin, damp rag to create a non-slip, supportive layer for the glass.
Put on leather gloves and safety glasses, and use cotton rags and window cleaner to clean both sides of the plate glass.
Set the clean plate glass onto the cloth-covered work surface. Next, mark the cut line onto the glass with a fine-tip indelible marker. Use a framing square, steel rule, or other straightedge to serve as a guide for the glass cutter.
Set the straightedge on the mark, and secure it with two strips of duct tape. Now, lubricate the cutting wheel on the glass cutter with a drop of lightweight cutting oil or machine oil. Then press the cutting wheel down hard against the glass and, in one uninterrupted motion, pull the cutter along the straightedge and right off the edge of the glass. Remove the straightedge from the glass. There are two basic ways to snap the scored glass into two pieces:.
Some glass cutters have a hexagonal multi-blade cutting wheel. It has six sides that all function as a cutting surface, so as you turn the wheel, a new blade moves over the glass. If you frequently have to cut glass in different thicknesses, a multi-blade cutting wheel is a great feature to have. Keep in mind that cutters with multi-blade cutting wheels aren't self-oiling, so you'll need to oil yours manually.
Snapping notches make it easier to snap the glass after scoring. These notches usually vary in size, so you can snap glass in different thicknesses. Some glass cutters feature a knocking head, which is a metal ball on the bottom end that allows you to tap the glass along the score line to make sure that it breaks cleanly. Some glass cutters have adjustable heads, so you can hold the cutter at exactly the right angle for each cut.
Most rotate degrees, giving you maximum flexibility. Self-oiling cutters usually have a brass handle that holds the oil chamber, though you can find some that are plastic. Glass cutters that aren't self-oiling typically feature a steel or aluminum handle with a rubberized grip, but a few have handles made of wood.
Most cutting heads are made of tungsten carbide or hardened steel. Carbide heads tend to last longer, but you'll pay less for a cutter with a steel head.
Proper safety procedures are crucial, especially when you're new to glass cutting. Wear safety goggles to protect your eyes from any errant shards that might fly when you're cutting and use protective gloves to prevent cuts and other injuries.
If the glass is extremely dirty, wash it with a sponge and soapy water. If the glass isn't that dirty, spritzing it with glass cleaner and wiping it with a paper towel will probably suffice. What we like: Features a replaceable carbide steel cutting head and a durable metal handle with built-in oil reservoir.
Narrow blade for more exact cuts. Makes straight cutting in bulk a breeze. What we dislike: Doesn't work as well on thicker glass. Oil reservoir isn't always reliable, so you may need additional oil. Our take: A slim, budget-friendly glass cutter with a multi-blade wheel that allows you to cut multiple types of glass. What we like: Offers six cutting blades for scoring glass in a variety of ways. Two snap notches in thick and thin options. Wooden handle helps prevent hand fatigue.
Can cut multiple glass surfaces.
0コメント